Recently, Hulk Metal's casting foundry has achieved remarkable results in ensuring the safety of the factory and personnel due to the comprehensive implementation of daily safety regulations, which has attracted industry attention.

In terms of personnel protection

Hulk Metal requires all personnel entering the factory to correctly wear safety helmets, high-temperature and fire-resistant protective clothing, protective gloves, and protective shoes, and wear dust masks or gas masks in dusty areas. Operators strictly follow the operating procedures, and are strictly prohibited from changing process parameters or operating procedures without authorization. During hoisting operations, keep a safe distance from the hoisted objects, and are strictly prohibited from staying or walking below.

In terms of equipment operation and maintenance

A comprehensive inspection is carried out before the equipment is started, covering mechanical parts, electrical systems, and safety protection devices. Pay close attention to the status of the equipment during operation, and stop and check immediately if any abnormality is found. Cut off the power supply and hang warning signs when repairing the equipment to prevent misoperation. In addition, the equipment is regularly maintained to ensure that the equipment is in good operating condition.

In terms of site environmental management

Keep the passage unobstructed, no debris piled up, and the ground flat. Raw materials, semi-finished products and finished products are neatly classified and marked. Inflammable and explosive items are stored separately with warning signs and equipped with fire-fighting and protective facilities. At the same time, ventilation is strengthened to remove dust and harmful gases in time, and dust concentration is regularly tested and dust reduction measures are taken.

In terms of fire safety

Fire safety cannot be ignored. Hulk Metal is equipped with sufficient fire-fighting equipment in the factory, such as fire extinguishers, fire hydrants, fire-fighting sand, etc., and regularly inspects and maintains them to ensure that they are available at any time. Fire-fighting equipment is placed in a conspicuous and easy-to-access position, with no debris around. Smoking and the use of open flames are strictly prohibited in the factory. Open-fire operations require approval and fire prevention measures. Electrical equipment is also regularly inspected to prevent fire hazards.

Through this series of comprehensive and detailed daily safety regulations, the Hulk Metal casting foundry provides solid protection for factory safety and the life and health of construction workers, and also sets an example for safe production in the industry.